Spezial-PVC control cable with
oil resistant outer sheath adapted to
DIN VDE 0285-525-2-51 /
DIN EN 50525-2-51 and IEC 60227/75
deviation of conductor cross sections
Temperature range
flexing -5°C to +70°C
fixed installation -40°C to +70°C
Nominal voltage U0/U 300/500 V
Test voltage 2 kV, 5 minutes
Breakdown voltage min. 4000 V
Insulation resistance
min. 20 MOhm x km
Minimum bending radius
flexing 7,5x cable Ø
fixed installation 4x cable Ø
Radiation resistance
up to 80x106 cJ/kg (up to 80 Mrad)
Bare copper conductor, to
DIN VDE 0295 cl.5, fine wire,
BS 6360 cl.5, IEC 60228 cl.5
Core insulation of special PVC
compound type TI2 to
DIN VDE 0207-363-3 / DIN EN 50363-3
Core identification to DIN VDE 0293
black cores with continuous white
numbering
GN-YE conductor, 3 cores and above
in the outer layer
Cores stranded in layers with
optimal lay length
Outer sheath of special PVC
compound type TM5 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: grey (RAL 7001)
With meter marking
G = with GN-YE conductor
x = without GN-YE conductor (OZ)
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
Screened analogue type:
(H)05VVC4V5-K
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air. These are designed as control and connecting cables to machines, tool machineries, conveyor belts and production lines.
These cables are not effected to the chemical influences. Cables for moist and wet rooms, specially used for machines in breweries, bottling plants and car washing stations.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
